1. Home
  2. Guides
  3. UK construction
  4. Reverse-charge VAT

UK construction · VAT

Reverse-charge VAT for builders, explained

Last checked 6 min readUnited Kingdom

The short answer

Since 1 March 2021, when a VAT-registered business supplies building work to another VAT-registered business and the payment is reported under CIS, the supplier doesn't charge VAT. Its invoice says the domestic reverse charge applies and shows the VAT, but doesn't add it to the total. The customer pays that VAT to HMRC on its own VAT return, and can usually reclaim it on the same return.

It doesn't apply to zero-rated work such as most new homes, to homeowners, or to a customer who has confirmed in writing that it is an end user or intermediary supplier.

General information for firms in United Kingdom, checked against the official sources on 11 November 2026. It is not legal, tax or financial advice: rules change and contracts differ, so check your own position with your accountant or solicitor before you act.

When it applies

HMRC's flowchart for suppliers asks five questions. The reverse charge applies if the answer to all five is yes:

  1. Is your customer registered for VAT in the UK?
  2. Is the payment for the work reported under CIS?
  3. Is the work standard-rated or reduced-rated for VAT?
  4. Are you supplying the work yourself, rather than supplying staff as an employment business?
  5. Has your customer not told you in writing that it is an end user or intermediary supplier?

The services covered are the same as CIS construction operations: building, alteration, repair, demolition, groundworks, installing heating, lighting, power, drainage and similar systems, painting and decorating, site clearance, scaffolding erection and landscaping. Labour-only subcontractors are covered too.

When it doesn't

  • Zero-rated work. The reverse charge only covers standard- and reduced-rated services, so zero-rated work such as building most new homes is outside it. Separate standard-rated services on a new-build housing site are covered.
  • Homeowners. A homeowner having work done on their own home is not a CIS contractor, so the payment isn't reported under CIS and normal VAT rules apply.
  • End users and intermediaries who have told you so in writing (see below).
  • Services outside CIS, when supplied on their own: professional fees from architects and surveyors, making or delivering materials, signwriting, seating, blinds and shutters, and security systems.
  • Workers from an employment business. Supplying staff is outside the reverse charge.
  • A minor part. HMRC's guidance lets you ignore the reverse charge where it is a small part of a single supply, typically supply-and-fix work where the fitting is 5% or less of the value. Agree it with the customer at the start, on the value of the whole contract, not invoice by invoice. It doesn't apply where the main part is zero-rated.

End users and intermediary suppliers

An end user is a VAT- and CIS-registered business that receives building work but doesn't sell construction services on, such as a property investment company refurbishing a building it lets out. Building contractors are not usually end users, because they sell construction services on to their clients.

An intermediary supplier is a VAT- and CIS-registered business that passes the work on to an end user it is connected or linked to, such as another company in the same group, or a landlord and tenant with an interest in the same property.

Either one must tell its supplier in writing, in a letter, an email or the contract, that it is an end user or intermediary. Until it does, the supplier keeps applying the reverse charge. If you think a customer might be an end user but have nothing in writing, HMRC says to apply the reverse charge. Ask your accountant before relying on a standard clause about end-user status in your terms.

What the invoice must say

A reverse charge invoice needs all the usual VAT invoice details, plus a clear note that the domestic reverse charge applies and that the customer must account for the VAT. HMRC's examples of wording include "VAT Act 1994 Section 55A applies", "S55A VATA 94 applies" and "Customer to pay the VAT to HMRC". Show the amount of VAT due under the reverse charge (or, if your software can't, the rate), but don't include it in the amount the customer pays. Credit notes must show the reverse charge too.

Your VAT return

If you supply reverse charge work, put the net value of the sale in box 6 and no output VAT in box 1.

If you buy reverse charge work, put the VAT on the invoice in box 1 as if you had charged it, reclaim it in box 4 under the normal rules, and put the net value of the purchase in box 7. For most contractors who can reclaim all their VAT, the two cancel out.

Cash accounting, flat rate and cash flow

  • Cash accounting. You can't use the Cash Accounting Scheme for reverse charge supplies you buy or sell, but you can keep using it for everything else.
  • Flat Rate Scheme. Leave reverse charge sales out of your flat-rate calculation. For reverse charge purchases, you account for the VAT and reclaim it on the same return. HMRC suggests that firms mainly making reverse charge supplies check whether the flat rate scheme is still worth it.
  • Cash flow. Subcontractors no longer receive VAT from their customers, so some find they are owed VAT by HMRC on each return. HMRC suggests considering monthly VAT returns.

Materials and mixed supplies

For VAT, materials supplied with the work form a single supply with it, so the reverse charge applies to the whole value. Don't split labour and materials onto separate invoices to avoid it. That is a VAT rule only: for CIS you still separate out the materials cost, as our CIS guide explains.

If it goes wrong

If a supplier charges normal VAT when the reverse charge should have applied, HMRC can assess the customer for the VAT it should have accounted for. The customer then has to recover the wrongly charged VAT from the supplier, and the supplier corrects its own return. HMRC asks for errors to be corrected as soon as possible.

Checks before the first invoice

  • Suppliers: check your customer's VAT number is valid and its CIS registration through HMRC's CIS online service. HMRC warns that some contractors may not show up in the CIS check; if so, ask them to confirm in writing that they report payments under CIS. Get any end-user or intermediary notice in writing too.
  • Buyers: check the supplier's VAT number is valid using GOV.UK's free VAT number check, which HMRC lists as the first step for buyers. Tell suppliers in writing if you are an end user.

Questions

Does the reverse charge apply to new builds?

Not to zero-rated work, which covers building most new homes. Standard-rated services supplied separately on a new-build site are covered.

Do I charge VAT to a homeowner?

Yes, in the normal way. Homeowners aren't CIS contractors, so the payment isn't reported under CIS and the reverse charge doesn't apply.

Does it apply to subcontractors with gross payment status?

Yes. The reverse charge depends on the payment being reported under CIS, not on whether a CIS deduction is made.

Official sources

  1. GOV.UK, Check when you must use the VAT domestic reverse charge for building and construction services
  2. GOV.UK, VAT domestic reverse charge technical guide (with HMRC's flowcharts)
  3. GOV.UK, How to use the VAT reverse charge if you supply building and construction services
  4. GOV.UK, How to use the VAT reverse charge if you buy building and construction services
  5. HMRC, VAT Notice 700/12: How to fill in and submit your VAT Return
  6. GOV.UK, Check a UK VAT number

First published 11 November 2026. Last checked 11 November 2026. If something here has changed, tell us at hello@rijo.ai and we will check it.

Questions about any of this? Ask us.

A few lines is plenty. You will hear back within one working day with questions or a rough price.

Or email hello@rijo.ai Or call +44 7360 536033

What do you need?
Did a Rijo partner send you?
We reply within one working day. See our privacy notice.